505 Edge Marker - Outline the region to be extracted, covering all edges; press Ctrl for 'magnetic' edge-finding, Shift to erase
506 Edge Eraser - Erase any portion of marked edge region; Ctrl-click to erase entire edge
507 Touchup - (Preview mode) Brush to erase on extracted image; press Shift to unerase; keys 1 - 9 set tool pressure
508 Edge Cleaner - (Preview mode) Sweep to smooth jagged edges of extracted image; Keys 1 - 9 set tool strength
509 Key Color - To extract a region based on color similarity: check Use Key Color, then click with tool to pick reference color
510 Foreground - Click to fill a region to be kept with the extracted image; click again to remove fill
511 Zoom - Click to zoom in on a point; Shift- or right-click to zoom out
512 Pan - Drag to move image in window
513 Preferences\Flood Eraser
514 Channel Mixer
515 Levels
516 Curves
517 Color Balance
518 Flood Eraser
519 Background Eraser
520 files found
521 Click to fill adjacent pixels (within specified tolerance) with the foreground color\nFlood Fill Tool
522 Click to create "spectrum" of colors ranging from foreground to background\nGradient Fill Tool
523 Saving Original
524 Reading Files
525 Undo Enabled
526 Undo memory percentage
527 Undo compression level
528 Undo use disk
529 Undo disk size
530 Color
531 Lightness
532 Drag to rotate about the fixed point in 15-degree steps
533 Fix Red Eye
534 AGIF
535 Insufficient memory to perform operation.
536 %1 already exists.\nDo you want to replace it?
537 Click to repeat forever\nEndless Loop
538 Kodak Photo CD
539 -,-,pcd,0,3,R,-1
540 Importing Kodak PhotoCD Image
541 Render Layer
542 CheckerSize
543 CheckerColour1
544 CheckerColour2
545 Your computer's display properties are set to 256 colors or less.\nPhotoPlus requires that your display be set to 16-bit color or higher.\nUse Windows Control Panel\Display to alter your display properties and then restart PhotoPlus.
546 Drag out shape, Ctrl-drag to constrain; adjust and double-click\nGrill
547 Drag out shape, Ctrl-drag to constrain; adjust and double-click\nSpeech
548 Drag out shape, Ctrl-drag to constrain; adjust and double-click\nThought
549 Drag out shape, Ctrl-drag to constrain; adjust and double-click\nCorner
550 (%d,%d), H:%d, S:%d, L:%d, O:%d%%
551 (%d,%d), H:--, S:--, L:--, O:%d%%
552 (%d,%d), C:%d, M:%d, Y:%d, K:%d, O:%d%%
553 (%d,%d), C:--, M:--, Y:--, K:--, O:%d%%
554 (%d,%d), Grey:%d, O:%d%%
555 (%d,%d), Grey:--, O:%d%%
556 http://
557 Loading document
558 Storing document
559 Printing document
560 Tool Properties
561 Color
562 Brush Tip
563 Layers
564 Navigator
565 Animation
566 Unable to create brush because the selected area is larger than 1000 x 1000 pixels.
567 There are no TWAIN devices available.
568 ViewWebPages
569 ViewWebPagesDays
570 ViewWebPagesLast
571 SnapgridSpacingX
572 SnapgridSpacingY
573 SnapgridColour
574 NumColours
575 Cropping image
576 Deforming image
577 Line: Pos (%p), Length %h, Angle %u
578 Picture Brush
579 Preferences\PictureBrush
580 Origin(%p), Length %h, Angle %u
581 Click on edge; trace outline with mouse button up; click for manual nodes; Delete to retrace; double-click to close marquee\nMagnetic
582 Frequency
583 Contrast
584 Preferences\BackgroundEraser
585 Drag to erase part of active layer; exposes background color when used on Background layer\nStandard Eraser
586 Drag on Background layer to expose transparency (per tool properties) and promote layer\nBackground Eraser
587 RGB
588 Blur
589 Sharpen
590 Preferences\BlurBrush
591 Preferences\SharpenBrush
592 Drag to pick up color and blend in the direction of brush stroke\nSmudge Tool
593 Drag to reduce apparent sharpness under brush\nBlur Tool
594 Drag to increase apparent sharpness under brush\nSharpen Tool
595 Grow Selection
596 Undo History
597 Click to change selected node(s) so adjoining segments are independent; allows pointed intersection\nSharp
598 Click to change selected node(s) so adjoining segments have same slope; segment depth can still differ\nSmooth
599 Click to change selected node(s) so adjoining segments have same slope and depth\nSymmetric
600 Click where you want to add a node, then click this button\nAdd node
601 Click to delete selected node(s)\nDelete node(s)
602 Click to reset mesh to full-frame and rectangular; use Undo to reset mesh to original state\nReset Mesh
603 Click to hide mesh for better image preview; click again to reveal mesh\nHide/Show Mesh
604 Click to fill a region with transparency (per tool properties) based on color under first click\nFlood Eraser
605 file found
606 Shift-Click to define clone source
607 No
608 Y pos
609 Width
610 Height
611 Cache on / off
612 Cache central / local
613 Animated GIFs on / off
614 Max GIF size for animation
615 Thumbnail width
616 Thumbnail height
617 Local cache filename
618 CentralCacheDir
619 c:\temp
620 SerifBrowseFile8.sbw
621 PhotoPlusBrowseLog
622 Clear time High
623 Clear time Low
624 Clear cache - are you sure?
625 Channel Mixer
626 Curves
627 Levels
628 Color Balance
629 Brightness/Contrast
630 Hue/Saturation/Lightness
631 %d by %d pixels
632 %d by %d pixels per inch
633 bytes
634 Serif Photoplus File Format
635 color space
636 compression
637 Directory
638 Window Size & Position
639 Edge Marker
640 Foreground
641 Edge Eraser
642 Key Color
643 Touchup
644 Edge Cleaner
645 Zoom
646 Pan
647 Show Extra Controls
648 Tolerance
649 Tracing Bitmap
650 Start Preview
651 End Preview
652 ResourceCD
653 Tutorials
654 PhotoPlus Tutorials not found
655 PhotoPlus Resource CD
656 Resource CD-ROM Not Installed\n\nIn order to view the PhotoPlus 8 Tutorials or to browse the PhotoPlus 8 Resource CD, you must have purchased and installed the PhotoPlus 8 Resource CD-ROM.\n\nThe Resource CD-ROM contains an invaluable collection of professionally-designed Tutorials, Frames, Web Buttons, Photo-Objects, additional Gradient Fills, Instant Effects, Picture Brushes, Patterns and Sample PhotoPlus Files!\n\nYou can purchase this additional CD-ROM direct from Serif: check the Help/Contents and click on Support for contact details.
657 ResourceCDRoot
658 MapPixels
659 OverlapPolygons
660 Last Animation Export
661 Edit QuickShape
662 Gradient Fill
663 Gradient Transparency
664 Created in part with LEADTOOLS ⌐1991 - 2001 LEAD Technologies Inc, ALL RIGHTS RESERVED.
665 Registered to:
666 Unknown
667 Insert Picture
668 OpenDir
669 GraphicExportDir
670 Open Master Image
671 Performing undo steps
672 Performing redo steps
673 Refining
674 Changing density
675 Color: %d, %d, %d
676 Contiguous
677 Discontiguous
678 Edge Detected
679 Continual
680 Once
681 Background Swatch
682 Split Pos
683 %r %d %%
684 Automatically Select Layer
685 Preferences\Move
686 Instant Artist
687 Oil
688 Watercolor I
689 Pointillist
690 Expressionist
691 Impressionist
692 Munchist
693 Stroke
694 Colour
695 Shade Cropped Area
696 Preferences\Crop
697 Generating painting
698 - pass %d
699 Old Master
700 Watercolor II
701 Painting
702 PaintStyles
703 Advanced
704 Auto
705 Style
706 repos.paint
707 Giger
708 Pencil
709 Curve
710 Jitter
711 Segment
712 Add style
713 Delete style
714 Advanced
715 Guide: %u
716 Delete guide
717 Ruler Origin: %p
718 3D Lighting
719 3D Bump Map
720 3D Pattern Map
721 Colors
722 Paths
723 2D Pattern Map
724 Path %d
725 Selection Border
726 Smooth Selection
727 Threshold Selection
728 Item
729 2D Bump Map
730 Master
731 Reds
732 Yellows
733 Greens
734 Cyans
735 Blues
736 Magentas
737 Function
738 Advanced
739 Paint to Select
740 Gradient Map
741 Selective Color
742 Whites
743 Neutrals
744 Blacks
745 Contour
746 &Delete
747 Enable Mask
748 Disable Mask
749 BrushCursorStyle
750 Highlights
751 Midtones
752 Shadows
753 Align
754 Instant Effects
755 Web
756 Optimized
757 Ordered
758 Radius
759 Lightness
760 Add color range from image
761 Category
762 Error Diffusion
763 Styles
764 Lanczos2 Window
765 Lanczos3 Window
766 None
767 Low
768 Normal
769 Good
770 High
771 Precise
772 ExportOptimizer
773 Superior
774 Unsharp Mask
775 New
776 Delete Selection
777 Preferences\FreehandLine
778 Smoothness
779 Preferences\Curve
780 New Path
781 Duplicate Path
782 Delete Path
783 Stroke Path
784 Selection to Path
785 Path Edit
786 Add Depth Map
787 Depth Map
788 Delete Height Map
789 Layer
790 Are you sure you want to delete all the items in this category?
791 Add category...
792 Edit category...
793 Delete category
794 Add item
795 Edit item...
796 Delete item
797 Gradients
798 Blur More Filter
799 Sharpen More Filter
800 Maximum Filter
801 Minimum Filter
802 Applying
803 Average Blur Filter
804 Smart Blur Filter
805 Patterns
806 Sampled Colors
807 Select color range from image
808 Paint and Ink
809 Van Gogh
810 Shape Edit
811 Straight Outline Tool\nStraight Outline Tool
812 Freehand Outline Tool\nFreehand Outline Tool
813 Curved Outline Tool\nCurved Outline Tool
814 Options
815 Size
816 Polygons: %d
817 Quality %d
818 %d colors
819 Tolerance: %d
820 Edit Guides
821 Paint Shop Pro Picture Tubes (*.Tub)|*.Tub|
822 Import...
823 Scale the effects to fit the layer\nScale the effects to fit the layer
824 Scale the effects to fit the layer\nScale the effects to fit the layer
825 HSL
826 CMYK
827 Saving patterns...
828 Edit Fill
829 Edit Adjustment Layer
830 BrushTips
831 Simple
832 Edit Fill
833 R
834 G
835 B
836 C
837 M
838 Y
839 K
840 H
841 S
842 L
843 Effects...
844 Frame %i of %i\n( %ims )
845 Untitled %d
846 Exported picture
847 Path
1000 Click to change the highlight color
1001 Click to change the shadow color
1002 Click to add a new light source, then click in preview window to place light source
1004 Slider 1\nSlider 1
1005 Edit the style of the paint brush - higher values give a more bristley look
1006 Delete the currently selected light source
1007 Click to clone selected frame as a new frame\nNew Frame
1008 Edit the curve of the brush stroke - low values will give straight lines, high values will follow the contours of the original image
1017 Change this value to alter the hue
1021 Change this value to alter the saturation
1024 Brush Opacity\nBrush Opacity
1025 Fades brush while drawing\nFades brush while drawing
1026 Drag to set the blur value
1027 Change this value to alter the opacity
1028 Drag to set the tolerance value
1029 Drag to set the depth value
1030 Change this value to alter the depth
1034 Change this value to alter the angle
1035 Change this value to alter the number of waves
1040 Drag to localize or spread out the blur effect, as shown in the inset graph
1044 Drag to set the hue value
1046 Drag to set the brightness value
1048 Change this value to alter the localization of the blur, as shown in the inset graph
1049 Drag to set the saturation value
1052 Drag to adjust the amount of blurring
1053 Drag to set the luminance value
1057 Change this value to alter the amount of blurring
1059 Select the color channel to which the noise will be applied
1067 Check to adjust only the Hue value
1068 Generating Animation
1076 Select a color channel to view its value distribution
1088 Change this value to alter the number of times the animation loops
1093 Drag to set the green value
1095 Drag to set the blue value
1096 Slider 4\nSlider 4
1097 Change this value to alter the red bias
1098 Change this value to alter the green bias
1099 Zoom In
1100 Change this value to alter the blue bias
1101 Zoom Out
1106 Drag to set the red value
1112 Drag across a section of image to tag additional color range(s)
1114 Drag across a section of image to tag initial color range
1128 Check to use radial blur effect
1129 Check to select desired light type; drag source handles to adjust properties
1131 Check to use zoom blur effect
1132 Check to select desired light type; drag source handles to adjust properties
1135 Change this value to alter the tolerance
1136 Drag to set the intensity value
1137 Change this value to alter the intensity
1138 Check to use fragment blur effect
1146 Drag to set the angle value
1147 Drag to set the ripples value
1148 Change this value to alter the number of ripples
1150 Color tolerance to sample color\nColor tolerance to sample color
1152 Changes brush size based on pressure\nChanges brush size based on pressure
1153 Change brush opacity based on pressure\nChanges brush opacity based on pressure
1157 Use all layers\nUse all layers
1158 Aligned\nAligned
1159 Sets the number of times the animation repeats
1160 Change this value to set the number of milliseconds which each newly created frame will be displayed for
1161 Edit the amount of high frequency detail in the image - high values will give a less detailed image
1162 Smooths edges\nSmooths edges
1163 Line weight\nLine weight
1165 Smooths edges of the selection\nSmooths edges of the selection
1166 Softens edges of the selection\nSoftens edges of the selection
1168 Click to select previous frame of sequence\nPrevious Frame
1169 Click to select next frame of sequence\nNext Frame
1170 Click to halt playback\nStop
1171 Click to play sequence\nPlay
1172 Click to select first frame of sequence\nFirst Frame
1173 Click to select last frame of sequence\nLast Frame
1175 Click to delete selected frame(s)\nDelete Frame
1176 Exporting Picture
1177 Click for fixed number of repeats\nFixed Loop
1178 Creating Preview
1179 Registration
1180 Name
1181 Click an effect to select it for use
1182 Click to display Animation Effects dialog for defining transitions between frames
1183 Cyan
1184 Yellow
1185 Magenta
1186 Black
1187 Custom
1188 Screens
1189 File Information
1190 Crop marks
1191 Registration targets
1192 Registration stars
1193 Grayscale bar
1194 Color bar
1195 Screen
1196 Drag box or click on preview to change image view in window
1197 Company
1202 Check to generate all frames as new frames in the sequence; uncheck to overlay the effect with existing frames
1211 Check to build "two-way" sequence morphing to end state and back again
1218 Check to use motion blur effect
1219 Return style to its default state
1220 Show/hide advanced controls
1240 Slider 2\nSlider 2
1241 Slider 3\nSlider 3
1259 Determines how pixels interact with those on layers below; see Help/Effects Gallery\nBlend Mode
1260 Change this value to alter the threshold
1265 Disable animation looping
1266 Frame Delay
1275 Click to select the desired lens type
1276 Click to select the desired lens type
1277 Click to select the desired lens type
1278 Change this value to alter the brightness
1288 Drag to set the tolerance value
1289 Drag to set the blur value
1337 Change this value to alter the amount of time this frame will be displayed for
1338 Change this value to alter the number of frames to which the effect will be applied
1342 Click to zoom in\nZoom In
1344 Click to zoom out\nZoom Out
1346 Check to preview current layer only; uncheck to preview all visible layers
1347 Drag to adjust transition value between black and white, or enter new value above
1348 Adjust to control direction of the effect
1351 In-range areas appear as white, those out of range as black
1352 Drag to fine-tune tagged colors
1353 Change this value to set the lumanince
1354 Check to adjust all three channels together; uncheck to adjust individually
1355 Move cursor to see statistics for a particular value
1356 Drag to set the number of waves
1357 Drag to set the opacity value
1358 Change this value to alter the blur
1359 Check to apply the effect
1360 Click to define a new filter
1361 Click to delete selected filter
1362 Change this value to alter the opacity of the currently selected layer
1363 Drag to set the contrast value
1452 Use area of interest channel to hone results
1507 Edit the size of the dots the image is made from
1508 Choose a style from the list
1510 Edit the diameter of the brush used to create the paint strokes
1511 Edit the quality of the painting - low values for a slap-dashy rough look
1512 Use the slider to edit the diameter of the brush used to create the paint strokes
1513 Increase the value to create a more varied color scheme
1514 Edit the size of the dots the image is made from
1515 Increase the diversity of colors in the dots
1516 Use this to adjust the focus of the underlying image
1517 Increase or decrease the amount of detail kept in the resulting image
1518 Edit to increase or decrease contrast in the resulting image
1519 Edit to increase or decrease contrast in the resulting image
1520 Generate the preview image now
1521 Check this to make the preview regenerate each time a setting is changed
1524 Edit the amount of high frequency detail in the image - high values will give a less detailed image
1525 Choose high edge enhancement
1526 Choose medium edge enhancement
1527 Choose low edge enhancement
1528 Choose no edge enhancement
1529 Create a new style with these settings
1531 Delete this style
1543 Edit to change the length of the tendrils
1544 Edit to change the length of the tendrils
1545 The greater the value, the more tendrils there will be
1546 The greater the value, the more tendrils there will be
1547 Use this to adjust the focus of the underlying image
1548 Add to selection\nAdd
1549 Subtract from selection\nSubtract
1550 Have the brush strokes following the contours of the original image
1551 Have all the brush strokes going in the same direction
1552 Adjust angular offset of brush stroke
1554 Edit to add detail in the edges - more detail gives the impression of a softer pencil
1555 Edit to add detail in the edges - more detail gives the impression of a softer pencil
1556 Control the transparency range - low values for a greater range of transparency, high values for a more thresholded look
1557 Control the transparency range - low values for a greater range of transparency, high values for a more thresholded look
1558 If this is ticked, the image will be drawn as if onto a sheet of white paper - leaving transparent gaps where the source image is brightest
1559 Choose a thin pencil nib
1560 Choose a medium thickness pencil nib
1561 Choose a thick pencil nib
1562 Build image from short pencil strokes
1563 Build image from medium length pencil strokes
1564 Build image from long pencil strokes
1565 Edit the tidiness of the pencil strokes - low values for a uniform direction
1566 Edit the tidiness of the pencil strokes - low values for a uniform direction
1567 Edit the texture of the paper - low values for smooth paper, higher values for a very rough paper
1568 Edit the texture of the paper - low values for smooth paper, higher values for a very rough paper
1569 Edit the segmentation threshold - low values favours fewer, larger segments - high values for more small segments
1570 Edit the segmentation threshold - low values favours fewer, larger segments - high values for more small segments
1573 Change angle of stroke
1574 Change angle of pencil stroke
1575 Increase the value to create a more varied color scheme
1576 Increase the diversity of colors in the dots
1577 Edit the quality of the painting - low values for a slap-dashy rough look
1578 Increase or decrease the amount of detail kept in the resulting image
1579 Edit the style of the paint brush - higher values give a more bristley look
1580 Edit the minimum length of the brush strokes
1581 Edit the minimum length of the brush strokes
1582 Edit the maximum length of the brush strokes
1583 Edit the maximum length of the brush strokes
1584 Edit the curve of the brush stroke - low values will give straight lines, high values will follow the contours of the original image
1585 Choose whether or not to have the image split in to individually painted segments (gives better edge definition)
1586 Edit the diversity of stroke weights - low values for more uniform stroke weights, high values for a more varied look
1587 Edit the diversity of stroke weights - low values for more uniform stroke weights, high values for a more varied look
1636 Add to path\nAdd
1637 Subtract from path\nSubtract
1638 Intersect with path\nIntersect
1639 Exclude overlapping areas\nExclude
1660 New selection\nNew
1661 Intersect with selection\nIntersect
1662 Delete Node\nDelete Node
1663 Straighten Line\nStraighten Line
1664 Sharp Corner\nSharp Corner
1665 Smooth Corner\nSmooth Corner
1666 Symmetric Corner\nSymmetric Corner
1674 Node Edit Tool
1675 Shape Edit Tool
6000 Unknown
6001 DemoDir
6002 DemoDirTitle
6003 Error running Astound demo
6004 No Line
6005 Hairline
6006 Custom
6007 &Properties
6008 [Black]
6009 [White]
6010 [Clear]
6011 [Original]
6012 [Registration]
6013 Unnamed
6014 red
6015 yellow
6016 green
6017 blue
6018 cyan
6019 magenta
6020 light gray
6021 gray
6022 brown
6023 rouge
6024 sea green
6025 purple
6026 navy blue
6027 dark green
6028 orange
6029 pink
6030 dark gray
6031 blush
6032 banana
6033 mint
6034 lime
6035 chocolate
6036 mist
6037 parchment
6038 terracotta
6039 lilac
6040 burgundy
6041 cream
6042 peach
6043 sky blue
6044 Colors
6045 User Colors
6046 Expanding
6047 Copying
6048 Compressing
6049 Misc
6050 N/A
6051 Assertion failed at %s, %d
6052 Assertion failed
6053 Directories
6054 %%%s%%\%s
6055 Title
6056 CD-ROM
6057 Disk
6058 Drive %1!s! is not ready or contains the wrong %2!s!.\n%3!s!
6059 Drive %1!s! is not ready or contains the wrong %2!s!.\nPlease insert the %3!s! and press Retry.
6060 Drive %1!s! is not ready or contains the wrong %2!s!.\nPlease insert the %2!s! containing\n%3!s!\nand press Retry.
6061 Fill Palette
6062 Ink Palette
6063 Unknown
6064 Linear
6065 Unnamed
6066 Unused
6067 Radial
6068 Solid
6069 GraphicImportFilters
6070 GraphicExportFilters
6071 Placable Metafile
6072 Windows Metafile
6073 Windows Enhanced Metafile
6074 Windows Bitmap
6075 -,-,WMF,0,0,V
6076 -,-,WMF,1,1,V
6077 -,-,EMF,2,2,V
6088 -,-,BMP,3,3,R
6089 File appears to be %s, not %s.\nClick Yes for %s, No for %s, or Cancel
6090 Importing Bitmap
6091 Exporting Bitmap
6092 Importing Image
6093 Clear
6094 RGB(%d,%d,%d)
6095 Please insert the CD-ROM containing your photos and press Retry.
6096 Software\Serif\Common
6097 Software\Serif\
6098 Snap Grid
6099 Preferences
6100 Scroll to see more tabs
6101 Drag to see more tabs
6102 Right-click for options
6103 Hint\n
6104 Arial
6105 Small Font
6106 Unknown
6107 System\CurrentControlSet
6108 control
6109 Current User
6110 Ms Sans Serif
6111 Shared32DllDir
6112 SerifDll
6113 cm
6114 centimeters
6115 i
6116 in
6117 inches
6118 mm
6119 millimeters
6120 p
6121 points
6122 pp
6123 picas
6124 d
6125 didots
6126 cd
6127 ciceros
6128 ░
6129 degrees
6130 rads
6131 radians
6132 %
6133 percent
6134 inches-10ths
6135 "
6136 pt
6137 Welcomed
6138 This application is unable to run due to\nan installation or registration problem with\n%s.\nPlease reinstall and try again.
6139 %s: SetAllocSize %d (%d)
6140 %s: AccessCheck %d (%d)
6141 %s: AccessGrow %d (%d)
6142 %s: InsertArrayAt %d,%d (%d)
6143 %s: InsertAt %d,%d (%d)
6144 %s: RemoveAt %d,%d (%d)
6145 CFraction: divide by zero
6146 TabBar Slider
6147 CVector: divide by zero
6148 Portable Network Graphics
6149 -,-,PNG,5,5,R
6150 pix
6151 pixels
6152 ft
6153 feet
6154 yd
6155 yards
6156 m
6157 meters
6158 km
6159 kilometers
6160 mi
6161 miles
6162 grads
6163 gradians
6164 BitDepth
6165 Palette
6166 Dither
6167 Compression
6168 Quality
6169 Transparent
6170 Interlaced
6171 AntiAliased
6172 CMYK
6173 NumColours
6174 Tolerance
6175 MapPixels
6176 OverlapPolygons
6177 Smoothness
11771 Vary the brightness and/or contrast
11772 Vary the hue, saturation, and/or lightness values
11773 Evenly distribute the lightness levels
11774 Invert each color, replacing it with an "opposite" value
11775 Create a monochromatic (black and white) representation
11776 Flip horizontally\nFlip horizontally
11777 Flip vertically\nFlip vertically
11778 Rotate the image, layer, or selection through a preset or variable angle
11779 Select the entire active layer
11780 Select nothing (Shortcut: Click with any selection tool)
11781 Select the portion of the active layer outside the current selection
11782 Save the current image in a file format other than PhotoPlus (.SPP)
11783 Shrink the borders of the selection by a specified number of pixels
11784 Extend the borders of the selection by a specified number of pixels
11785 Check to show rulers; uncheck to hide rulers
11816 Restore the zoom view to 100%
11817 Blur the edges of the selection by a specified value
11818 Check to show the alignment grid; uncheck to hide grid
11819 Click arrow to display flyout\nRetouch Tools
11821 Click arrow to display flyout\nText Tools
11822 Drag with tool on the image to move it in relation to its window\nPan Tool
11823 Left-click with tool on the image to zoom in; right-click to zoom out\nZoom Tool
11824 Drag to draw freehand lines with current brush tip on active layer or within selection\nPaintbrush Tool
11825 Click on a pixel to select adjacent pixels similar in color; higher tolerance value (On Tool Properties tab) includes more pixels\nColor Selection Tool
11826 Left-click with tool to define foreground color; right-click to define background color\nColor Pickup Tool
11827 Click arrow to display flyout\nFill Tools
11828 Drag to "spray paint" with current brush tip on active layer or within selection\nAirbrush Tool
11829 Shift-click to define pickup point; dragging elsewhere copies pixels from pickup region\nClone Tool
11832 Create a new layer above the active layer (Shortcut: Right-click layer name)\nNew Layer
11833 Clone the contents of the active layer onto a new layer
11834 Delete the active layer (Shortcut: Right-click layer name)\nDelete Layer
11837 Drag selection or layer to move image contents; Alt-click then drag to duplicate\nMove Tool
11838 Click arrow to display flyout; +Shift to add, +Alt to subtract; press Ctrl after drawing for Move tool\nStandard Selection Tools
11839 Click arrow to display flyout; +Shift to add, +Alt to subtract; press Ctrl after drawing for Move tool\nStandard Selection Tools
11842 Zoom in
11843 Zoom out
11845 Single view
11846 Double view
11847 Quad view
11848 Apply the Posterize effect, specifying the number of tonal levels (lightness values)
11849 Display the Histogram window, with image statistics and value graph
11850 Change the pixel size and/or print size of the whole image
11851 Change the image width and/or height by adding or subtracting edge pixels
11853 Apply a basic variable Blur effect
11854 Apply the Gaussian Blur effect, which averages pixel values along a curve
11856 Sharply emphasize both horizontal and vertical edges
11857 Isolate horizontal edges
11858 Isolate vertical edges
11859 Isolate both horizontal and vertical edges
11861 Add noise (grain)
11863 Apply the Median Cut effect for broader areas of similar color
11864 Sharpen the image
11865 Apply a subtle blur effect
11868 Apply the Solarize effect for dramatic changes in mid-tone regions
11870 Apply the Emboss effect for a bas-relief impression
11872 Apply the Mosaic effect for a tiled appearance
11873 Apply the Twirl distortion effect
11874 Apply the Ripple distortion effect
11875 Apply the Wave distortion effect
11876 Apply the Pinch (concave) or Punch (convex) distortion effect
11878 Check to show the marquee defining the edges of the selection
11879 Extend the selection to include any pixels on the active layer close in color value
11881 Combine the visible layers into a single layer
11882 Combine all layers, visible and invisible, into a single layer
11883 Vary the hue, saturation, and/or lightness of a portion of the color range
11884 Apply Motion, Radial, Zoom, or Fragment blur effects
11886 Apply either a Spot or Candle lighting effect
11887 Add a Diffuse Glow effect, broadening existing highlights
11888 Drag out region (Ctrl key constrains), adjust edges, double-click to crop\nCrop Tool
11889 Use a dialog to define custom filters
11891 Add a diffused shadow effect "behind" solid regions of the active layer
11892 Customize PhotoPlus settings, including undo, plugin, layout, and startup options
11894 Choose a TWAIN source such as a scanner or digital camera
11895 Display the acquisition dialog for the selected TWAIN source
11896 Add a rounded-edge and/or drop shadow to solid regions on the active layer
11897 Click arrow to display flyout; drag out shaped selection, adjust, double-click to confirm\nAdjustable Selection Tools
11899 Move the active layer to the top of the layer stack
11900 Move the active layer to the bottom of the layer stack
11901 Move the active layer up one level in the layer stack
11902 Move the active layer down one level in the layer stack
11908 Drag to draw straight line using foreground color; +Ctrl to constrain in 15-degree steps\nOutline Tools
11909 Create a new image file from the contents of the Clipboard\nPaste as New Image
11910 Insert the contents of the Clipboard as a new layer in the current image
11911 Duplicate contents of selected region (on all visible layers) to the Clipboard
11912 Insert the contents of the Clipboard centered in the current selection, replacing it
11913 Add a Lens Flare effect, simulating interaction of light source with camera optics
11914 Preview the current image in your World Wide Web browser
11915 Click to place horizontal slice guide; +Shift for vertical; drag guides to move them, or off top/bottom to delete\nImage Slice Tool
11918 Combine the active layer with the visible layer below it, forming a new single layer
11923 Layer Properties\nLayer Properties
11924 Export slices in the active document\nExport slices
11925 Click arrow to display flyout\nImage Map Tools
11929 Spread out the lightness levels
11931 Extend the selection to include adjacent pixels close in color value
11933 Click button, then on a toolbar or tab for associated Help topic\nContext Help
11935 Create a mask that reveals the entire active layer
11936 Create a mask that hides the entire active layer
11937 Create a mask that reveals the selected region, hides the remaining portion of the layer
11938 Creates a mask that hides the selected region, reveals the remaining portion of the layer
11939 Remove the mask from the active layer and cancel the mask's effects
11940 Check to make changes to active layer's mask; uncheck to edit active layer directly
11941 Check to see active layer's mask. Darker mask values = more transparent pixels below
11942 Check to see how the layer looks without the mask's effects
11953 Edit Palette\nEdit Palette
11954 Load Palette\nLoad Palette
11955 Save Palette\nSave Palette
11957 Check to show the Layers tab; uncheck to hide it
11958 Check to show the Tool Properties tab; uncheck to hide it
11959 Check to show the Color tab; uncheck to hide it
11960 Check to show the Brush Tip tab; uncheck to hide it
11961 Check to show the Navigator tab; uncheck to hide it
11962 Vary the distribution of lightness values in the red, green, and blue channels
11963 Remove the portion of the image (on all layers) outside the edges of the selection
11965 Image Map Properties\nProperties
11966 Delete Image Map\nDelete
11967 Bring Image Map to Front\nBring to front
11968 Send Image Map to Back\nSend to back
11969 Bring Image Map forward one\nForward one
11970 Send Image Map back one\nBack One
11971 Apply a deformation\nDeform
11972 Drag to move, scale, or rotate region; watch cursors; press Shift, Alt, Ctrl for HintLine tips\nDeform Tool
11974 Save the current image under its original name, using the original file format
11975 Save the current image under a different name, using the original file format
11976 Display Export Optimizer to preview and select export formats and options
11977 Remove color information while retaining light and dark gradations
11978 Correct the "red eye" effect in photos taken with a flash
11979 Check to show the Tools toolbar; uncheck to hide it
11980 Check to show the Standard toolbar; uncheck to hide it
11982 Display the PhotoPlus Effects Gallery, with examples of image effects and blend modes
11983 Flip Image\nFlip Image
11984 Flip Layer\nFlip Layer
11985 Flip Selection\nFlip Selection
11986 Flip the entire image left to right
11987 Flip the active layer left to right
11988 Flip the selection left to right
11989 Flip the entire image top to bottom
11990 Flip the active layer top to bottom
11991 Flip the selection top to bottom
11992 Check to show the Animation tab; uncheck to hide it\nShow/Hide Animation Tab
11994 Impose the mask's effect onto the active layer
11995 Promote to Layer
11996 Promote to Layer\nPromote to Layer
11997 Promote to Layer\nPromote to Layer
11998 Render Layer\nRender Layer
11999 Register your copy of PhotoPlus\nRegister your copy of PhotoPlus
12003 New Adjustment Layer\nNew Adjustment Layer
12016 Launch the image segmentation tool
12022 Click arrow to display flyout\nWarp Tools
12023 Drag to pull pixels in the direction of brush stroke\nElastic Warp Tool
12024 Drag to push pixels 90║ to right of brush stroke; clockwise for pinch, counter-clockwise for punch effect\nThick/Thin Warp Tool
12025 IDC_WARP_REFLECT
12026 IDC_WARP_PUNCH
12030 Drag to reduce strength of current warp effect\nUnwarp Tool
12031 Drop Shadow
12032 Inner Shadow
12033 Outer Glow
12034 Inner Glow
12035 Bevel and Emboss
12036 Color Fill
12037 Outer Bevel
12038 Inner Bevel
12039 Emboss
12040 Pillow Emboss
12041 Use to adjust handles of shape on active shape layer\nEdit Tools
12044 Browse for files
12047 Click to display mesh; drag mesh nodes and lines to deform image; use Mesh toolbar to customize mesh\nMesh Warp Tool
12048 Layer Effects\nLayer Effects
12049 New Selection\nNew Selection
12053 Open File
12054 File Information
12055 Bring up preferences for Browser
12060 Browse the resource CD
12061 View the PhotoPlus tutorials
12063 Click to begin or end deforming the selected nodes\nDeform Mesh
12065 La la la la
12069 Creates a selection from the layer's mask
12070 Create a selection from the layer's alpha channel
12071 Create a layer from the current selection
12072 Creates a new layer from the current selection
12077 Shows/Hides Guides
12080 New Path\nNew Path
12082 Create a new path from the current selection\nSelection To Path
12083 Create a selection from the selected path\nPath To Selection
12084 Delete Path\nDelete Path
12114 Check to show the Instant Effects tab; uncheck to hide it
12117 Combine the layer's effects into the layer bitmap
12119 Stroke the path with the selected brush\nStroke Path
12121 Add Layer Mask\nAdd Layer Mask
12122 Add Layer Depth Map\nAdd Layer Depth Map
15637 Add, remove or edit guides
15638 Show Rulers
15639 Save On Exit
15645 Save Preferences
15646 Preferences
15647 Contract Selection
15654 Expand Selection
15655 Feather Selection
15656 Selection Border
15657 Smooth Selection
15658 Threshold Selection
16216 ForeColour
16217 BackColour
16218 Preferences\Lasso
16219 Preferences\Magnetic Lasso
16220 Preferences\Freehand Lasso
16221 Preferences\QuickSelection
16222 Feather
16223 Antialiased
16224 Colour Table
16225 Num Colours
16226 New Frame
16227 Delete Frame(s)
16228 Animation Effect
16229 Sample Merged
16230 Drop Shadow
16231 Bevel
16232 Hue/Saturation/Lightness Filter
16233 Bevel Filter
16234 Brightness and Contrast Filter
16235 Custom Filter
16236 Diffuse Glow Filter
16237 Drop Shadow Filter
16238 Fade Filter
16239 Gamma Correction Filter
16240 Gaussian Blur Filter
16241 Emboss Filter
16242 Noise Filter
16243 Blur Filter
16244 Median Filter
16245 Mosaic Filter
16246 Posterize Filter
16247 Sharpen Filter
16248 Solarize Filter
16249 Lens Flare Filter
16250 Lighting Effects Filter
16251 Move Filter
16252 Pinch/Punch Filter
16253 Replace Color Filter
16254 Ripple Filter
16255 Blur Effects Filter
16256 Threshold Filter
16257 Twirl Filter
16258 Wave Filter
16259 Image Preview
16260 Stop
16261 Play
16262 of
16263 Help\Websites
16264 Dont Show Online Information
16265 Help
16266 &OK
16267 &Cancel
16268 &Help
16269 Move Frame
16270 The currently selected layer must be visible in the current frame for animation effects to be applied.
16271 Animation Effect
16272 Red
16273 Blue
16274 Green
16275 Luminance
16276 Gray
16277 Ready
16278 Change this value to alter the luminance
16279 Applying Grayscale
16280 Frame
16281 Depth
16282 Channels
16283 Percentage
16284 Tile Size
16285 Levels
16286 Intensity
16287 Direction
16288 You cannot move a layer below the background layer\n
16289 You cannot move the background layer\n
16290 Cannot open background layer\n
16291 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nPie
16292 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nStar
16293 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nDonut
16294 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nPolygon
16295 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nArrow
16296 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nDouble Arrow
16297 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nChevron
16298 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nMoon
16299 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nTear
16300 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nBadge
16301 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nHeart
16302 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nSpiral
16303 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nPetal
16304 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nZig Zag
16305 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nWave
16306 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nGrill
16307 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nSpeech
16308 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nThought
16309 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nCorner
16310 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nCornered Rectangle
16311 Drag to move, scale, or rotate region; watch cursor for cues; press Shift, Alt, Ctrl for HintLine tips on special options
16312 Preferences\Polygonal Lasso
16313 Preferences\Extract
16314 Threshold
16315 More >>
16316 Less <<
16317 Textures
16318 Contiguous
57344 PhotoPlus
57345 Ready
57600 Display the Startup Wizard or New dialog to create a new image file\nNew
57601 Display the Open File dialog to open an existing image file\nOpen
57602 Close the current image file
57603 Save the current image as a PhotoPlus (.SPP) file under its current name\nSave
57604 Save the current image as a PhotoPlus (.SPP) file under a different name
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the current image\nPrint
57609 Display full pages\nPrint Preview
57610 Update the container to show any changes\nUpdate
57611 Save a copy of the active document with a new name\nSave Copy
57616 Open the named file
57617 Open the named file
57618 Open the named file
57619 Open the named file
57620 Open the named file
57621 Open the named file
57622 Open the named file
57623 Open the named file
57624 Open the named file
57625 Open the named file
57626 Open the named file
57627 Open the named file
57628 Open the named file
57629 Open the named file
57630 Open the named file
57631 Open the named file
57632 Delete the contents of the selected region without placing a copy on the Clipboard
57633 Erase everything\nErase All
57634 Duplicate the contents of selected region or active layer to the Clipboard\nCopy
57635 Delete contents of the selected region or active layer and place a copy on the Clipboard
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Reverse the most recent change to the current image\nUndo
57644 Reverse the most recent Undo action\nRedo
57648 Open another window for the active image
57649 Arrange the minimized windows
57650 Arrange the windows as overlapping tiles
57651 Arrange the windows as horizontal, non-overlapping tiles
57652 Arrange the windows as vertical, non-overlapping tiles
57653 Split the active window into panes\nSplit
57664 Display version and copyright information
57665 Close PhotoPlus
57666 Display the main Help menu
57667 Display the index of Help topics
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Check to show the Tools toolbar; uncheck to hide it
59393 Check to show the HintLine; uncheck to hide it
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
